Safes and Locks for Marijuana Dispensaries and Suppliers

The medical marijuana industry is here and gaining acceptance.  Things are still evolving for growers and dispensaries, which can make the business side of it difficult.  From what we see some of those issues are:

  • Cannabis dispensaries and growers are much more likely to suffer break-ins than traditional businesses. The product involved, and the perception that huge amounts of cash are involved, make dispensaries tempting targets.
  • Insurance may be difficult to obtain which opens up business owners to out-of-pocket losses.
  • Start-up loans are extremely hard to get, so more out-of-pocket money is required to open a business.
  • Banking difficulties may require that more cash be kept on-site.
  • Regulations are likely to change at the local, state and federal levels. What you spend today to comply with regulations might be wasted money by next year.

In one way or another, the following products will help with physical security issues:  Door locks & hardware, safes & vault doors, camera systems, alarm & monitoring systems.  Hoogerhyde deals with the first two of these.

Locks:  A dispensary’s building should have high security locks.  Avoid using residential quality locks that you buy at box stores.  Commercial grade locks are much stronger so they will slow down would-be burglars.  Restricted key systems will prevent employees from having duplicate keys made without authorization.  Consider up-grading to keyless locks to eliminate keys altogether.

Safes:  Most cannabis suppliers for whom we have provided safes have chosen to save money by purchasing less security than we would recommend.  This is usually because cash is in short supply when starting the business without bank loans.  Naturally, safes are important for protecting inventory and cash.  We always have a selection of used high security safes in stock to help save money.

If a business does not have good insurance a break-in could cause a major financial loss.  Top notch physical security then becomes especially important, to minimize potential loss.  Besides that, a vault with a high security rating may be a requirement to be insured.  One of our dispensary clients who purchased what we consider to be an appropriate safe, was told by his insurance company that a TL-15 rated safe was needed to obtain coverage.

If the federal government eventually relaxes marijuana laws, it may require suppliers to comply with the same D.E.A. requirements that it dictates when dealing with other controlled substances.  In that case the dispensary that initially bought a cheap safe would need to spend money again to buy a TL-15.

Hoogerhyde Safe can help protect your medical marijuana business.  Out store is in Grand Rapids but we deliver to anywhere in Michigan.  We have a big assortment of new and used safes, from small to huge — and vault doors.  We also have the knowledge to answer your questions.  In addition, we can increase your building’s security by installing high quality locks and key systems.

Beware of Gun Safes Which Are Mis-represented

One of the fastest growing companies in the gun safe industry does not make anything, they import their gun safes from China.  This blog has referred to them in the past because they are most flagrant liars, the most deceitful people I know.  (Fear of getting sued prevents using their name.)  They came around again last week with a cube truck in which they display a number of products.  Giving them another chance, I climbed into the truck and listened to the national sales manager for a minute about how great their Chinese gun safes are.

Their top-of-line gun safe is supposed to be built of 8 gauge steel, which would be pretty good, but feeling the steel was enough to tell that this was another lie.  With a micrometer and gauge chart it took about 30 seconds to show he was wrong.  The steel was 10 gauge – a big difference.  Even after proving the lie he made up stupid stories to weasel out of the problem:  “Well the supplier’s paperwork says 8 gauge”; “it depends on which gauge system you are using”, “maybe this is one of the old models”, etc.

This guy stated that their gun safes are better than other imports because the factory they use is the best one in China.  But this factory is one which I know uses skip-welds. It also uses drywall construction scraps for insulation.  This company claims that one of their product lines is “Made in America” even though they are, in fact, made in China.  Apparently, if you install the lock and a few little pieces in the U.S. you can claim the whole safe is American.  I could go on….

The point is that these crooks claim to be protecting your valuables while intentionally misleading you.  Dishonestly selling JUNK at low prices is why they are growing.  If you buy a safe to protect the guns which are your passion, or to protect a significant part or your net worth, you darn well better buy your gun safe from someone who knows and cares and is honest about what they sell!

A Good Alternative to a Gun Safe for Storing Guns

Instead of buying a cheap gun safe because your budget is limited, consider spending a similar amount on a good used commercial safe and make your own “gun safe”.  You may be way better off both fire-wise and security-wise.

IMG_2569IMG_2571

For example, pictured is a commercial safe we took in last week.  It was used in a high security situation – you can see where several types of alarms were mounted to the front.  It also has a legitimate 4-hour U.L. certified fire rating.  There are several gun safes with ratings as high as 2.5 hours, but those ratings are bogus and the safes would never pass U.L. tests for that long.

The Mosler safe shown is 76”H X 42.5”W X 30”D outside and 60 X 33 X20 inside.  That is 23 cubic feet of inside capacity.  We will sell it for $1500.  So if you invested a few hours into making a gun rack, and maybe painting it, you would end up with an outstanding unit for the price of a poor quality gun safe.  Check with your nearest safe dealer for similar opportunities.  If you live in Michigan come see us.

Interior Options on Gun Safes

If you have shopped for a gun safe you have run into the “one size fits all” interior configurations.  Everyone is supposed to want the same set-up – a vertical divider in the center and 10 to 15 gun spaces on each side.  But that doesn’t work well for everyone.

I sold a gun safe to a woman this week who has just two rifles, and plans on one more.  She has lots of other stuff that needs to be secured, however.  So why should she waste half of the interior space for just two rifles?  A Fort Knox unit in the 60 X 31 X 27 size with a four-gun interior works perfectly for her.  She has four full width shelves for jewelry, pistols and documents with just a small area dedicated to long guns.

img_2519

Fort Knox has many different interior configurations so the owner can use the space efficiently.  A 60 X 31 X 27, for instance, can be set up to handle 4, 8, 13, 18, 26, 31, 36 or 40 long guns.  If your needs change in a few years you can order different shelving.  The photo shows a small unit, 60 X 26, with a 3 gun interior.  Lots of usable shelf space.  Other alternatives include the “all gun” rack shown at the bottom, which has 18 spaces.

Fort Knox dealers will have lots of gun safe options in stock, and lead times for special orders are usually only about 6 to 8 weeks.  Fort Knox specializes in allowing you to get exactly what you want by offering many sizes, security levels, colors, lock arrangements, etc.  Don’t “make do” with a gun safe that doesn’t fit your needs, just because it’s the only choice offered.  Go to a Fort Knox dealer and spec out a unit that is exactly what you want, including the right interior.

Vault Doors by Graffunder

The photo shows a Graffunder vault door waiting to be delivered and installed (handle spokes not yet installed).  This unit is an in-swing version, in the smaller of their two sizes, a VB7834.  The paint is textured “Medusa Gray” with chrome hardware, which I like because it seems to show the depth and the lines.

img_2483

Even though this is Graffunder’s smaller size and lightest construction it still weighs 1300# and has plenty of strength built into it.  The door is ½” solid plate steel, the outside and inside frames are 5/8″ and ½” respectively, and the threshold plate is 1” solid steel.  Like the doors on Graffunder gun safes, Graffunder vault doors fit tighter into the frame than any others on the market.  There is absolutely no way to insert any kind of prying tool.  They also have special lock protection, unique relockers and other security features not found on other units.

Graffunders are the very best.  Other good, less expensive options are American Security, Golden Spike or Fort Knox vault doors.  If you are building a new home, or if your existing home has a place for one, a walk-in vault door is a terrific addition that adds value to your home.